- Drag finishing machine DF Wet
DF Wet
Drag finishing machine for mass finishing and polishing of knee and hip joints, burr shafts, watch cases, dies, pistons and decorative workpieces
Standard equipment
- Process drum coated with PU to reduce wear
- High-quality sealed cladding in steel, exterior of panels and base painted
- Flow-optimized process container
- Vertical spindle with ball screw drive for 90% on-time
- Display and selection of vertical workpiece position
- Infinitely variable drag finishing speed via frequency inverter
- Storage capacity for up to 200 process configurations
- Greater clearance container rim and holder makes it easier to fit workpieces to holders
- Stronger bearings for holding workpiece holders of up to 15 kg
- Process data can be backed up onto external MMC card
Watch the video: DF-Wet
| Type
|
Width x Depth x Height
[mm] |
Weight
[kg] |
Power
[kVA/V] |
holders
[Qty] |
Max. immersion depth
[mm] | container volume
[l] |
|---|---|---|---|---|---|---|
| DF-3 Wet | 1200 x 1000 x 2000 | 370 | 2.5/400 | 3 | 250 | 100 | DF-5 Wet | 1300 x 1150 x 2000 | 780 | 4.0/400 | 5 | 250 | 134 |
| DF-8 Wet | 1650 x 1360 x 2450 | 850 | 6.0/400 | 8 | 250 |
